Customizing Equipment I/O

Command Line Shortcut: ' User Permissions Level: All Product Level: All Adding, deleting and modifying I/O including adding Multiple Ports,Connector Types, Signal Types, Appending Characters and adding to Input, Output Or Both

---

Before You Start

You will need to know what Ports, Signal Types, Connector Types you are going to be using for this piece of equipment. You will also need to know what ports are Input, Output or Both.

How To Add A Single Port

Step	Description
Click Advanced Tools>Equipment Library OR Database>Equipment Library OR Command shortcut LE	This will bring you to the equipment library where you will find the piece of equipment you are wanting to customise. Equipment Library
After highlighting the piece of equipment you wish to modify, Click the I/O tab.	If this is a new piece of equipment you created, you will have a blank Input and Output Field. I/O Field
Click [Add Ports]	You will now have a dialog box that allows you to select all information about this port. Port Creation Window
After filling out the info, Click [Add Ports And Close]	As you can see in the image, I have added an RCA Port with an audio Signal Type to the Input field. Single Port Creation
You can also create a port on both the Input and Output fields by selecting [Both] under the Add To Which List	As you can see in this image, I have added an RCA Port with an audio Signal Type to BOTH the Input and Output field. Input & Output Port Creation
After selecting your panel and filling out any other information you would like, Click [Finish].	Your new equipment will now be created and you will automatically be taken to it in your Equipment Library.

Adding/Changing I/O Ports And Updating Detail

At this point, your newly created equipment should be the only visible piece of equipment

Step	Description
Click the [Detail] tab.	From here enter in any information you have avaliable on your equipment. (Again, we ask that you please be as thorough as possible and please upload your equipment to the community when your done) Equipment Detail Page
When you have finished updating your equipment detail, Click the [I/O] tab.	This will pull up the I/O page where you will be able to add, delete or modify all inputs and outputs on this piece of equipment. I/O Detail Page
In the middle of the screen, Click the [Add Ports] button	A dialog box will now pop up allowing you to fully customise your I/O list. You have the ability to select add as an Input, Output or Both, The Name Of The Port, Cable End Connectors, Signal Type, Input and Output Pin Types, Add Multiple Ports and Appending Characters. To learn more about customising your I/O, please refer to Customising I/O On Equipment Add Port Dialog Box
Click [Finish]	Your equipment is now ready to be placed in your drawing.

Uploading Equipment Back To The Community Library

We ask that all of our WireCAD users upload any created equipment back to our Community Server to share with everyone. This way the database will continue to grow and new equipment will be avaliable.

Please refer to Uploading Equipment To Community Server