Difference between revisions of "CAD:PolyLine"
From WireCAD Online Help
Wirecadadmin (Talk | contribs) (Created page with "Description This object is a 2D/3D line composed of line and arc (bulges) segments. Polyline is specified by an array of Vertexes (points). When the Polyline has thickness then t...") |
Wirecadadmin (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | Description | + | |
| − | This object is a 2D/3D line composed of line and arc (bulges) segments. Polyline is specified by an array of Vertexes (points). When the Polyline has thickness then the extrusion vector of the polyline defines the direction of the thickness. | + | == Description == |
| + | |||
| + | This object is a 2D/3D line composed of line and arc (bulges) segments. | ||
| + | |||
| + | |||
| + | [[File:POLYLINE.JPG]] | ||
| + | |||
| + | Polyline is specified by an array of Vertexes (points). When the Polyline has thickness then the extrusion vector of the polyline defines the direction of the thickness. | ||
Polyline can be Open or Closed, can be SPLine and be filled with a color or a hatch. | Polyline can be Open or Closed, can be SPLine and be filled with a color or a hatch. | ||
| − | Remarks | + | |
| + | == Remarks == | ||
| + | |||
Bulge Geometry : | Bulge Geometry : | ||
| + | [[File:Bulge.gif]] | ||
Revision as of 16:27, 27 December 2010
Description
This object is a 2D/3D line composed of line and arc (bulges) segments.
Polyline is specified by an array of Vertexes (points). When the Polyline has thickness then the extrusion vector of the polyline defines the direction of the thickness.
Polyline can be Open or Closed, can be SPLine and be filled with a color or a hatch.
Remarks
Bulge Geometry :
