Difference between revisions of "On and Off Sheet Pointers"

Revision as of 11:23, 10 October 2011

Before You Start

You will need to have a drawing (or drawings) with equipment placed and what Input and Output you would like to connect.

How To Create An On Sheet Pointer

Step	Description
With your drawing open, select the [Draw Cables] tab at the bottom of your project explorer.	This will open up your draw cables dialog box. Draw Cables Dialog Box
Click the [Replace Cables With Pointers] box.	A dialog box will pop up asking you to "Select a default pointer. Set Source and Destination Terminal Offsets". Select Pointer Dialog Box
Click [Ok] and select the Pointer you would like to use and your Terminal Offsets.	Your Source and Destination Offsets are going to be the distance from the port you would like your pointer in drawing units. Select Pointer
In the dialog box, start by selecting the Manufacturer field and input who makes your piece of equipment.	Clicking anywhere in the field will populate a drop down menu in which you will be able to select from the list of Manufacturers currently avaliable. Alternately, if your Manufacturer isnt listed and you havent created it yet, you can Click the [...] which will bring up a new dialog box allowing you to create your Manufacturer from here. Add Manufacturer Window
After filling out the first set of fields Click [Next]	You are now presented with another set of fields to fill out. The only reccomended field is the front panel field. Click [...] to open the folder and select the 2D_Elevations folder. This folder contains a set of premade panels. Here you will need to browse in order to find the panel that works best for your type of equipment. You can also refer to Creating Equipment Panels to learn how to create custom panels. Panel Select Window
After selecting your panel and filling out any other information you would like, Click [Finish].	Your new equipment will now be created and you will automatically be taken to it in your Equipment Library.

Adding/Changing I/O Ports And Updating Detail

At this point, your newly created equipment should be the only visible piece of equipment

Step	Description
Click the [Detail] tab.	From here enter in any information you have avaliable on your equipment. (Again, we ask that you please be as thorough as possible and please upload your equipment to the community when you're done) Equipment Detail Page
When you have finished updating your equipment detail, Click the [I/O] tab.	This will pull up the I/O page where you will be able to add, delete or modify all inputs and outputs on this piece of equipment. I/O Detail Page
In the middle of the screen, Click the [Add Ports] button	A dialog box will now pop up allowing you to fully customise your I/O list. You have the ability to select add as an Input, Output or Both, The Name Of The Port, Cable End Connectors, Signal Type, Input and Output Pin Types, Add Multiple Ports and Appending Characters. To learn more about customising your I/O, please refer to Customizing Equipment I/O Add Port Dialog Box
Click [Finish]	Your equipment is now ready to be placed in your drawing.

Uploading Equipment Back To The Community Library

We ask that all of our WireCAD users upload any created equipment back to our Community Server to share with everyone. This way the database will continue to grow and new equipment will be avaliable.

Please refer to Uploading Equipment To Community Server