Difference between revisions of "HOWTO:New Drawing"

Latest revision as of 18:59, 12 February 2013

Before You Start

There are a couple of things you need to think about before you create your new drawing:
1. What type of paper/printer layout will you be using when it comes time to print your project.
2. What will this drawing be named.

How To Create a New Drawing

Step	Description
1. Click File>New Drawing OR Click the New Drawing tab in the Project Explorer Or enter nd in the Command Line
2. A dialog box will pop up asking you to select a Drawing Template. This will be based on the type of paper you plan to print your drawings on.
3. Select your template and Click [Next].	You will now have a dialog box pop up asking you to select if you want to use Model Space Boundries. Selecting use Model Space Boundries will put a boundry in your model space based on your template choice. WireCAD will allow you to draw outside the boundries but depending on your viewport and template setup, anything outside the boundries may or may not be shown when printing. ---- Note: You can add Model Space Boundries later if you desire by Clicking Format>Model Space Boundries Note: Your model space boundry will be created based on the viewport that is defined in your layout File:Model Space.pngModel Space Boundries
4. After selecting whether or not to use boundries, Click [Next]	You will now have a dialog box pop up asking you to Click [Finish]
5. Click [Finish] and WireCAD will open your new drawing with your Model Space Boundries placed in them.