<< Click to Display Table of Contents >> Navigation:  WireCAD PRO Manual > Getting Started > Assigning Terminals > How To: Assign Multiple Terminals

This function performs the following steps:

1.Opens a port selection dialog based on SysName.

2.Prompts the user to select the SysName and the port or ports to display(or range of ports of multiple terminals are selected). The order the terminals are added to the selection set is the order that they will be assigned numbers.

3.Updates the terminal(s) in the drawing.

 

1.Create and open a project.

2.Create and open a drawing.

3.Add terminals to the drawing.

4.Select the terminals to assign.

5.Click Advanced Tools > Equipment Functions > Assign Terminal(s) or enter ats in the Commandline and click [Enter].

6.Select the SysName from the SysNames dropdown.

7.Select the top Input port to apply to the terminal input.

8.Select the top Output port to apply to the terminal output.

9.Click [OK].

 

WireCAD will assign the terminals from top to bottom in the grid and based on the selection set order.